The EverClear 2 retains the same functionality from the EV1 while improving slightly on all aspects: - New Batteries which will make your EverClear turn longer and will hold up better if you leave them unused for a while (lower self-discharge rate - always charge up your batteries before storing them). Be careful, the EV1 batteries are not compatible with the new EverClear 2. - The new rapid-eject design allows you:

- easily remove the rotor without tools for cleaning and maintenance

- exchange mirrors with a simple tool or event without and at the same time avoid mechanical shocks to the bearings

- lubricate using standard handpiece lubricant

- The new EverClear 2 design enables perfect hygiene reconditioning in a thermal disinfector. Also steam sterilizing (at 134°C) is possible.

- EverClear 2 Batteries can now be charged using either a small USB-charging-adapter or an optional USB stainless-steel charging station. This way you can even charge batteries on-the-go.

Before any kind of desinfection please remove the batteries. You may wipe the batteries and your EverClear 2 with alcool based wet-wipe (avoid agressive surface desinfectants, especially containing bleach or chlorine as these can attack the stainless-steel). Avoid spraying or putting excessive moisture in openings like the contacts for the battery. First use the rapid-ejection system to eject your rotor. Remove the mirror and wipe down all parts with a wet towel using pure alcool (isopropanol).

Lubricate the rotor with a short splash of standard dental handpiece lubricant using the enclosed spray-bottle-adapter and wipe of any excess.

Mount everything back in the handpiece. With the battery removed you may now place your EverClear 2 in a thermal disinfector or a steam sterilizer (at 134°C).